How to Change Battery Dodge Journey Key Fob
Replacing the battery in your Dodge Journey key fob is a task that many drivers will need to perform at some point. Whether the battery has simply run out or you’ve encountered issues with your key fob, knowing how to change the battery is essential. In this article, we’ll guide you through the process step by step, ensuring that you can easily swap out the battery and get back to using your key fob without any hassle.
Step 1: Gather the Necessary Tools
Before you begin, gather the tools you’ll need for the job. You will require a flathead screwdriver, a small flat-blade screwdriver, and a new CR2032 battery. It’s always a good idea to have a spare battery on hand, as these can be found at most electronics stores or online.
Step 2: Locate the Battery Compartment
The next step is to locate the battery compartment on your Dodge Journey key fob. Most key fobs have a cover that is easily removable, usually with a simple press or slide mechanism. Once you’ve located the cover, remove it to expose the battery compartment.
Step 3: Remove the Old Battery
With the cover off, use the flathead screwdriver to carefully pry the battery out of the compartment. Be gentle to avoid damaging the battery or the contacts inside the compartment.
Step 4: Insert the New Battery
Take your new CR2032 battery and align it with the contacts in the compartment. Make sure the battery is oriented correctly before placing it into the compartment. The positive (+) side of the battery should be facing up, as indicated by a small plus sign on the battery.
Step 5: Replace the Battery Compartment Cover
Once the new battery is securely in place, replace the battery compartment cover. Make sure it clicks into place, indicating that it is sealed properly.
Step 6: Test the Key Fob
With the battery compartment cover back on, test your key fob to ensure that it is functioning correctly. If the key fob is still not working, double-check that the battery is oriented correctly and that there are no signs of damage to the key fob or the battery compartment.
Conclusion
Changing the battery in your Dodge Journey key fob is a straightforward process that can be completed in just a few minutes. By following these simple steps, you can keep your key fob working properly and avoid the inconvenience of a dead battery. Remember to store your key fob in a safe place and handle it with care to prevent damage to the battery compartment and the battery itself.
