How to Change Battery on Dodge Journey Key Fob
Replacing the battery in your Dodge Journey key fob is a relatively simple task that can be done at home with a few basic tools. Whether your key fob has stopped working or the battery is simply getting low, knowing how to change it can save you time and money. In this article, we will guide you through the process of changing the battery in your Dodge Journey key fob step by step.
Materials Needed:
Before you begin, gather the following materials:
– A flathead screwdriver
– A new CR2032 battery
– Optional: Needle-nose pliers or tweezers
Step 1: Remove the Key Fob Cover
1. Locate the back of the key fob and press the release button to remove the cover. The release button is typically found on the bottom of the key fob.
2. Gently pull the cover off to expose the battery compartment.
Step 2: Remove the Old Battery
1. Using the flathead screwdriver, carefully pry the battery out of the compartment. Be sure to hold the battery with the flat side facing up to avoid damaging the circuit board.
2. If the battery is stuck, you may need to use needle-nose pliers or tweezers to gently remove it.
Step 3: Insert the New Battery
1. Place the new CR2032 battery into the compartment with the flat side facing up.
2. Make sure the battery is securely in place before replacing the cover.
Step 4: Reassemble the Key Fob
1. Put the cover back on the key fob and press it firmly until it clicks into place.
2. Test the key fob to ensure that it is functioning properly.
Conclusion:
Changing the battery in your Dodge Journey key fob is a straightforward process that can be completed in just a few minutes. By following these simple steps, you can save yourself the trouble of visiting a professional and ensure that your key fob is always ready for use. Always keep extra batteries on hand to avoid being stranded without a working key fob in the future.
